Figure 12-4 One-Touch Array Configuration; Figure 12-5 Array Settings Screen; Figure 12-6 Hdd Information Screen - NEC NRS Expanded Series Configuration Manual

ISSUE 1.0
12-4

Figure 12-4 One-touch Array Configuration

4. Edit the array name in the Array Name text field.
5. Click OK to start configuring the array.
If you install four or more HDDs for one-touch configuration, a
hot spare disk is set by default. It is recommended to set the hot
spare disk for automatically rebuilding the array when the array
NOTE
is abnormal.
6. When the array configuration is complete, click OK in the popup message
box to finish the settings.
7. Click the Array tab to view the information of the successfully created array.

Figure 12-5 Array Settings Screen

By default, the one-touch configuration creates an array and a
virtual disk.
NOTE
8. A created array displays as an HDD in the HDD information screen.

Figure 12-6 HDD Information Screen

RAID