Production Data; Setup Data Info - JUMO IMAGO F3000 Operating Instructions Manual

Process controller for the meat processing industry

Hide thumbs Also See for IMAGO F3000:

Table of Contents

7 Setup Program

7.7.12 Production data

7.8

Production data, if activated are queried and displayed on the instrument ev-

ery time the program starts (configuration: "Entry type").

During the queries, texts or numbers can ("optional") or must ("obligatory") be

entered.

Texts can be entered for 8 displays/queries, each 16 characters long (e.g. op-

erator No. or batch No.).

These data can be read out for recording and visualization.

This is used for the documentation of various items of information that appear

in the print-out of the setup data.

IMAGO F3000 / 10.01

Table of Contents