6 Operation
6.9.7 Process step editor
In the setup
program
In the
instrument
6.9.8 Temperature unit
44
Process steps can be entered in the instrument, and very comfortably through
the setup.
v Chapter 7.2 "Process steps"
In the instrument, the function is accessed through the
h In the basic status, press
h Select Configuration
A list appears of all the process steps that have been set up.
h Use the arrow keys to select the process step you want,
and confirm with
Here you can set up the control contacts, adjustable values, controllers, limit
comparators and setpoints within the limits given and as explained in the set-
up program.
v Chapter 7.2.2 "Editing process steps"
h Confirm all entries with
Here you can set the dimensional unit to be used for the display of tempera-
ture setpoints and actual values.
v Chapter 7.6.2 "Instrument data"
Configuration
Process steps
key.
IMAGO F3000 / 10.01