Load New Instrument Software - JUMO IMAGO F3000 Operating Instructions Manual

Process controller for the meat processing industry

Hide thumbs Also See for IMAGO F3000:

Table of Contents

6.14.11 Load new instrument software

IMAGO F3000 / 10.01

h Confirm with

A progress bar appears, to indicate that the data are being copied and have

been accepted.

h Acknowledge with

h Load the instrument software into the P&P memory

h Confirm with

A message indicates that data are being loaded into the P&P memory.

h Press the

h Enter the password for the configuration level

After entering the password, the gray lettering changes color to black, to indi-

cate that the instrument software can now be set.

h Set instrument software to Yes

h Press

h Confirm with

A progress bar shows that the data are being loaded and accepted.

key

6 Operation

Table of Contents