Temporary Alterations - JUMO IMAGO F3000 Operating Instructions Manual

Process controller for the meat processing industry

Hide thumbs Also See for IMAGO F3000:

Table of Contents

6.4.2 Temporary alterations

– through

function keys

in the present

segment

– in the

present and

all following

segments

Features

IMAGO F3000 / 10.01

It is possible to alter the parameters "Process step", "Chamber temperature",

"Chamber humidity", "Core temperature" and "Segment time" while the

program is running, by using the appropriate function keys.

However, such temporary alterations are only valid for a single run of the pro-

gram.

When the program is started again, the original values are re-activated.

h Press "Chamber", "Core", "Humidity" or "Segment time"

h Enter the new value on the keyboard (numbers 1 to 9)

The display accepts the value after 30 seconds, or

h Confirm with Enter.

h Press the

The representation in the display is the same as for program entry.

A segment that has already been processed is marked by "OK". The present

segment is highlighted in red, and marked by an "x".

"TAlt" is shown in the screen at top right.

h Use the arrow keys to move to the value you want

h Press

h Confirm with

h Finish making temporary changes with

Segments that have already been processed (marked OK) cannot

be altered afterwards!

key

to make a temporary alteration to the selected value

6 Operation

Table of Contents