Table of Contents
Advertisement
6.9.9 Password (config)
6.10 MENU parameterization
6.10.1 Controller parameter sets
6.10.2 Limit comparators
6.10.3 Smoke generator
6.10.4 Self-optimization
6.10.5 Password (parameter)
IMAGO F3000 / 10.01
The factory-set password is 9200. The password can be defined separately for
the parameter and configuration levels.
v Chapter 7.6.2 "Instrument data"
This includes all the settings that must be made during commissioning and
adapted to suit the system during test running.
8 different parameter sets can be entered here.
v Chapter 7.5.1 "Controller parameters"
The assignment of the parameter sets to the controllers is made during the
definition of the process steps.
v Chapter 7.2 "Process steps"
Here you can enter the switching action, limits, switching differential, action
and switching status on probe break.
v Chapter 7.5.2 "Limit comparators"
The settings for operating a smoke generator with a conveyor screw are made
here.
Chapter 7.5.3 "Smoke generator"
Here you can define which controllers are to be optimized, and which parame-
ter set is to be used to store the parameters which are determined.
Self-optimization can only be initiated on the instrument itself.
The factory-set password is 9200. The password can be defined separately for
the parameter and configuration levels.
v Chapter 7.6.2 "Instrument data"
6 Operation
45
Advertisement
Table of Contents
