Table of Contents
Advertisement
Constants
7.7.10 Software locks
A
7.7.11 Operating hours counter
Input
Hours
Permitted
operating hours
Password
IMAGO F3000 / 10.01
Constant
Comment
name
TRUE
logical 1
FALSE
logical 0
Various operating facilities on the instrument can be inhibited.
These locks can only be removed through the setup program!
It is not possible to do this on the instrument!
The following operating facilities can be locked:
- Keypad
- Keypad, except Start/Stop key
- Editing of programs
- Temporary alterations
Two separate operating hours counter/timers are provided in the instrument.
The operational time for a connected piece of equipment and the instrument
(in automatic operation) can be monitored and restricted.
Selection/settings
Equipment
(Logic selector)
Switched off
0 — 32767
System
0 — 32767
(max. 8 figures)
0
k
/ bold = factory setting
7 Setup Program
Description
The start of counting is triggered by a logic signal.
The permissible number of operating hours
If this number is reached, a message or alarm is
generated.
v Chapter 7.7.7 "Logic and alarm functions"
0 = switched off
When the permitted number of operating hours has
been reached, it is no longer possible to start a
program.
A message window appears on the screen and
requests the entry of the password.
When the password has been entered, the
instrument carries on functioning as normal.
87
Advertisement
Table of Contents
