Table of Contents
Advertisement
6.14 Plug & Play (P&P)
Explanation
Indication
Applications
A
LED indication
IMAGO F3000 / 10.01
The Plug & Play memory is available as an option.
The Plug & Play memory is used for automatic saving of the configuration, the
programs and the process steps. It is also possible to load a new version of
the instrument software into the Imago F3000.
You can recognize the operating status from the color of the diskette symbol
for the P&P memory, in the screen at bottom right.
Diskette color
gray
blue
- Duplicate the IMAGO F3000
This creates an image copy of an instrument, so that if it is transferred to an
unconfigured instrument, this instrument will behave exactly like the first one.
- Copy programs
to another instrument.
- Data backup in the event of a fault
The automatic save must be activated in order for the instrument to
automatically record all the changes up to the time of the fault.
v Chapter 6.14.2 "Activate automatic save"
A faulty instrument can be replaced without any problems, by inserting the
Plug & Play memory into the new instrument.
A red LED indicates the operating status.
LED indication
LED off
Explanation
Plug & Play memory is inserted correctly,
no other function
Plug & Play memory is inserted correctly,
automatic saving is active
Explanation
Plug & Play memory not inserted correctly
6 Operation
47
Advertisement
Table of Contents
