Table of Contents
Advertisement
6 Operation
Special
characters
End program
entry
Other
functions
Copy or insert
a segment
H
Delete a
segment
34
h Press
A window will appear that contains all kinds of special characters. Make a
selection with the cursor keys.
h Press "Exit" twice
Program entry is now finished. The instrument returns to the basic status.
h During program entry, press
appear
The arrow keys
a segment.
Rotating through three levels, the meanings change to allow better navigation
in the program entry and deleting or copying functions.
h Use the arrow keys to select the segment that is to be copied
h Press
h Press
board
h Use the arrow keys to select the segment in front of which the copy will be
inserted
h Press
lighted in red. The following segment numbers will be incremented accor-
dingly.
If no segment was copied to the clipboard, then a segment will be
inserted that is filled with default values.
h Use the arrow keys to select the segment that is to be deleted.
h Press
h Press
and
repeatedly, until
to copy the segment highlighted in red to the clip-
to insert the copied segment in front of the one high-
repeatedly, until
to delete the segment highlighted in red
repeatedly, until other functions
are used to navigate around
appears
appears
IMAGO F3000 / 10.01
Advertisement
Table of Contents
