Table of Contents
Advertisement
7 Setup Program
7.6
User data
7.6.1 Screen saver
from
to
Switch-off event
Waiting time
Control signal
7.6.2 Instrument data
Device designation (max. 31 characters)
Language
Program
selection
Unit
Frequency
Password for
configuration
Password for
parameterization
Changeover
Start : date
Start : time
74
To save the screen, the graphics display can be switched off after a preset
time without any user action, or by a control signal.
Selection/settings
Continuous operation
00:00:00 — 23:59:59
05:30:00
00:00:00 — 23:59:59
16:00:00
Switch-off
Waiting time
Control signal
0 — 32767 min
(Logic selector)
OFF
k
/ bold = factory setting
Various settings for the basic operation of the instrument are made here.
Selection/settings
IMAGO F3000
German
English
French
Program icon
Program name
°C
°F
50Hz
60Hz
Passwords
(4-digit numerical code)
9200
(4-digit numerical code)
9200
Summer time
OFF
Manual
Automatic
DD.MM.YYYY
25.03.2001
00:00:00 — 23:59:59
02:00:00
k
/ bold = factory setting
Description
The time for which the screen remains switched on.
The screen is switched off after a preset waiting
time following the last key stroke, or by a control
signal.
Description
Name of the instrument, as used for the data sets
in the protocol.
The language used for operating the instrument.
Defines the presentation of the program selection
on the instrument.
The dimensional unit for all temperature values
Supply power frequency
Access code for the configuration level
Access code for the parameter level
Defines how the changeover to/from summer time
is to be carried out.
Date for automatically changing over to summer
time
Time for automatically changing over to summer
time
IMAGO F3000 / 10.01
Advertisement
Table of Contents
