6.14.5 Replacing a faulty instrument
Condition
IMAGO F3000 / 10.01
h Go to the program selection, and
h Select the program to be copied (a tick appears)
h Confirm with
All the data marked by Yes will be copied from the P&P memory.
The data must have been stored in the memory by automatic save before the
instrument became faulty.
v Chapter 6.14.2 "Activate automatic save"
h Replace the faulty instrument by a new one
h Insert the P&P memory into the new instrument
The read symbol will appear.
h Acknowledge with
A message informs you that the data are being loaded into the instrument.
6 Operation
53