Table of Contents
Advertisement
7 Setup Program
Factory
settings
7.7.3 Texts
User texts
System texts
76
Function
Toggle relay 01 — 35
Temporary alteration:
Extra SP1
Temporary alteration:
Extra SP2
Temporary alteration: F-value
Temporary alteration: C-value Temporary C-value
Temporary alteration: DeltaT
Temporary alteration: chamber Temporary chamber setpoint
Temporary alteration:
humidity
Temporary alteration: core
Program pause
Manual operation
Temp. alt. remaining seg. time Remaining program time
Start program 1—25
Key
Function
1
Temporary alteration:
chamber
2
Previous program
3
Previous segment
4
Next segment
5
Temporary alteration:
humidity
6
Program pause
7
Process step
Up to 100 texts can be defined here, and then displayed on the instrument
when various events occur.
The system texts, which are used to guide the user on screen, can be altered
here according to user requirements.
Description
The switching state of a relay can be
changed by hand (manual toggle). If the relay
is already ON it is switched off. If the relay is
already OFF it is switched on.
The resulting state remains valid until the
change to the next segment, whereupon the
relay takes up the state defined in the next
process step.
Temporary extra setpoints
Temporary F-value
Temporary Delta T value
Temporary humidity setpoint
Temporary core setpoint
Program pause/continue
Changeover to manual operation
Program start
Key
Function
8
Manual operation
9
Temporary alteration: core
10
No function
11
No function
12
No function
IMAGO F3000 / 10.01
Advertisement
Table of Contents
