Table of Contents
Advertisement
Program
segments
Programs
6.2.2 Program entry
H
Select program
location
Scrolling pages
IMAGO F3000 / 10.01
During the program entry, the user can add in the following setpoints for the
program segments, as defined by the system manufacturer:
- chamber temperature, chamber humidity, core temperature
- delta-cooking, F-value, C-value, intensity of smoke generation,
additional values 1 and 2
- Segment running time
The additional values 1 and 2 can be used for special functions that have been
assigned to the system.
Are executable programs that can be linked to one another and designated by
a program name or icon.
This description assumes that the system manufacturer has already defined
the process steps. Process steps can be defined or altered in the instrument
or within the setup program.
Programs can not only be put together on the instrument, but also
very comfortably by using the PC.
The software to do this is available as an accessory, called
Program editor IMAGO F3000.
h Press the
h Use the arrow keys to select a vacant program location
h Confirm it with
If a page has been programmed with 5 segments, then the double-arrow keys
or
key
can be used to scroll through the pages.
6 Operation
29
Advertisement
Table of Contents
