7 Setup Program
7.7.6 Assignment of the relay outputs
Function
Timing
Time ON
Time OFF
78
Here you can assign specific functions to the logic outputs that are available
on the instrument (max. 40).
Relay output 1 — 20
Selection/settings
Switched off
Logic input 1 — 5
Control contact 1 — 36
Limit comparator 1 — 8
Logic 1 — 8
Output 1, controller 1 — 4
Output 2, controller 1 — 4
Program end signal
Fan stage 1 — 3
Ignition, smoke generator 1 — 2
Intensity, smoke generator 1
Ext. logic input 1 — 4
(interface)
Humidity control
Combined alarm
Active
Inactive
No timing
Time delay
Pulse time
0 — 32000sec
0 — 32000sec
k
/ bold = factory setting
Description
All the functions described can be assigned to a
relay output.
Time delay:
The ON and OFF switching transitions (edges) can
be delayed for a specified time.
Pulse time:
The output can be operated in a specified
pulse/pause ratio.
Timing cannot be defined for control contacts and
controller outputs.
Delay for transition to ON, or pulse time
Delay for transition to OFF, or pause time
IMAGO F3000 / 10.01