Automatic Operation; Pause Program - JUMO IMAGO F3000 Operating Instructions Manual

Process controller for the meat processing industry

Hide thumbs Also See for IMAGO F3000:

Table of Contents

6 Operation

6.4

Automatic operation

Screen

changeover

In automatic operation, both process screens are presented with all the set-

points that have been defined. All the controllers which have been selected for

the process steps are activated, and the "Automatic" symbol appears at bot-

tom right.

These screen layouts can be freely arranged in the setup

v Chapter "Screen layout"

If this is pressed once, the program run timer is paused, and a coffee-cup

symbol appears in the screen at bottom right.

h Press the key again

The coffee cup disappears, and the program continues to run from the point

where it was interrupted.

IMAGO F3000 / 10.01

Table of Contents