Table of Contents
Advertisement
6.1
Basic status
Switch on
instrument
What is
shown?
Company logo
Process step
IMAGO F3000 / 10.01
If the instrument has been switched on by applying the supply power (power-
on) and no program is running, then the screen for the basic status will be dis-
played.
The values that have already been recorded are shown in the LED displays.
The representation on the color screen looks like this:
You can select a different background picture (wallpaper) instead of the one
that is set at the factory. This could, for instance, be your own logo or a diagram
of the installation.
A bitmap file is required, with a resolution of 320 x 185 pixels in the 16 colors
of the standard Windows palette. This can be arranged in the setup program.
The state of the plant in its initial condition is defined through a process step in
the setup program. This process step contains the information on the standby
condition of the instrument when no program is running.
This is defined in the setup program.
v Chapter 7.2 "Process steps"
v Chapter 7.4.6 "Program source"
6 Operation
27
Advertisement
Table of Contents
