Setting Analog Output - Hioki 3154 Instruction Manual

_____________________________________________________________________

6.2.3 Setting Analog Output

(1) During READY status, press SHIFT key and then press
(2) Press
(3) Press STOP key to show "FULL rAnGE" or "EACH
(4) Press
(5) After selecting "FULL rAnGE" or "EACH rAnGE",
Just to verify setting, just go to setting display. After
verifying blinking indicator, press STOP key to return to
READY status.
______________________________________________________________
3154 Analog Output Setting
and hold VOLT key approximately two seconds or
longer to display "SPECIAL".
/ key to display "A.OUt rAnGE".
rAnGE" blinking.
/ key to switch blinking displays.
press STOP key to confirm option and returns to
READY status.
Verifying setting
65
External Interface