Analog Outputting; Connecting The 9094 Output Cord - Hioki 3154 Instruction Manual

_____________________________________________________________________

6.2 Analog Outputting

6.2.1 Connecting the 9094 OUTPUT CORD

To avoid risk of damaging the unit and output cord, do not
CAUTION
input external voltage and current to analog output terminal.
Do not connect output cord plug to the 3154 measurement
terminal.
Rear panel analog output terminal outputs direct voltage
proportional to resistance.
When connecting to recorder, etc., use input resistance over
1 MΩ. Low input resistance results in incorrect readings.
Connect optional 9094 OUTPUT CORD shown below.
______________________________________________________________
63
External Interface