Chapter 3Setting Basic Testing Conditions - Hioki 3154 Instruction Manual

_____________________________________________________________________
The below shows setting items and procedures.
Preparation for testing
Setting testing conditions
Setting test voltage
Setting comparator
Setting resistance range
Setting timer
Setting sampling rate
Start testing
______________________________________________________________
Setting Basic Testing
・See Chapter 2
Preparation for Testing.
・Select from 25 V to 1000 V.
See 3.1.
Setting lower limit value
・When using PASS/FAIL
judgment, set lower limit
value. See 3.2.1.
Setting test mode
・When using PASS/FAIL
judgment, set test mode.
See 3.2.2.
・Set either manual range
(4 types) or auto range.
See 3.3.
Setting test duration
・Set test duration. See 3.4.1
Setting delay time
・Set delay time. See 3.4.2.
・Set FAST or SLOW.
See 3.5.
・See Chapter 4 Testing.
Setting Basic Testing Conditions
Chapter 3
Conditions
13