Chapter 4 Testing - Hioki 3154 Instruction Manual

_____________________________________________________________________
HIOKI 3154 DIGITAL MΩ HiTESTER is equipped with
READY status, setting status and TEST status.
(1) READY status
(2) Setting status
(3) TEST status
See 4.7 Testing with 9299 SWITCHED PROBE to conduct
NOTE
measurement using 9299 SWITCHED PROBE.
______________________________________________________________
Stands ready for testing. TEST lamp is either OFF or
blinking during READY status.
Sets various test settings. Each setting display blinks
during setting status.
To test with voltage between measurement terminals.
TEST lamp is ON during TEST status.
29
Chapter 4
Testing
Testing