Electric Specifications - Hioki 3154 Instruction Manual

50
_____________________________________________________________________

6.1.2 Electric Specifications

Input signal specifications
(Applied signal names: START, STOP, VOLT0, VOLT1,
VOLT2)
Input signal
Maximum applied voltage
HIGH level
LOW level
Output signal specifications
(Applied signal names: PASS, FAIL, TEST)
Output signal
Maximum load voltage
Maximum output current
EXT.DCV terminal maximum input voltage: 30 VDC input
to EXT.COM terminal
Internal power supply output
(between INT.DCV and INT.GND terminals)
Output voltage
Maximum load current
Output signal is a photocoupler open corrector output.
3154 is internally connected to EXT.DCV terminal at 4.7
kΩ pull up resistance.
______________________________________________________________
External Interface
Active LOW input
Voltage of EXT.DCV terminal
Voltage of EXT.DCV terminal or open
0.3 VDC or less
Open corrector output
DC+30 V
(when not using EXT.DCV terminal)
60 mADC/1 signal (when LOW level)
5 VDC
100 mADC