Front Panel - Hioki 3154 Instruction Manual

4
_____________________________________________________________________

1.3.2 Front Panel

1
1. Measurement
terminals
2. TEST lamp
3. /
LOAD/SAVE
key
4. START key
5. STOP key
6. EXT.SW
terminal
7. REMOTE lamp
8. LOCK lamp
9. LOCK key
MΩ RANGE
key
10. COMP key
BEEP key
11. TIMER key
SPEED key
______________________________________________________________
Outline
2
6 7 8 9
Connect test probes. High voltage occurs
between terminals continuously electrically
connected to rear panel measurement terminals.
Turns on during testing. Blinks during
discharging buildup in tested object.
key Press to change settings.
Press SHIFT key - LOAD/SAVE key to save and
load setting conditions.
Press to start testing.
Press to terminate testing or to confirm settings.
Switch signal terminal for optional 9299
SWITCHED PROBE.
Turns on when communicating with personal
computer via RS-232C.
Turns on when key lock is engaged.
Press to engage or disengage key lock.
Press SHIFT key - MΩ RANGE key to change to
and from auto range/manual range.
Press to set comparator.
Press SHIFT key - BEEP key to set beep sound.
Press to set test duration and delay time.
Press SHIFT key - SPEED key to set
measurement speed.
10 11 12 13 14
3 4 5
15