Command Reference - Hioki 3154 Instruction Manual

_____________________________________________________________________

7.1.5 Command Reference

Format of command explanations
Syntax
<data>
Response
Error
Example
Command List Chart
Specialized
command
Voltage setting
Comparator
Timer
Resistance
range
Sampling rate
______________________________________________________________
Specifies the syntax for the command.
For a command that has parameters, specifies their
format.
Explains the received data.
Specifies what types of error may occur.
These are simple example of the use of the command.
PC> Denotes command from the computer.
3154> Denotes command from the 3154.
Command
∗CLS
∗ESR?
∗IDN?
*RST
:VOLTage
:VOLTage?
:COMParator
:COMParator?
:COMParator:BEEPer
:COMParator:BEEPer?
:TIMer
:TIMer?
:DELay
:DELay?
:MOHM:RANGe
:MOHM:RANGe?
:SPEed
:SPEed?
Function
Clears event resister
Queries event status
resister
Queries equipment ID
Resets equipment
Sets test voltage
Queries test voltage
Sets comparator
Queries comparator
Sets judgment time beep
sound
Queries judgment time beep
sound
Sets test duration
Queries test duration
Sets delay time
Queries delay time
Sets resistance range
Queries resistance range
Sets measurement speed
Queries measurement speed
RS-232C Interface
83