Introduction - Hioki 3154 Instruction Manual

_____________________________________________________________________

Introduction

Thank you for purchasing the HIOKI "3154 DIGITAL MΩ
HiTESTER." To obtain maximum performance from the
product, please read this manual first, and keep it handy for
future reference.
Changes to Specifications
Changes are made to software version 1.10.
Software version appears following the model name (3154)
after start up.
・Measurement range is expanded up to 4000 MΩ with
・Analog output voltage is changed from 4 V to 2 V when
・Outputs 4 V output with analog output at each resistance
・Wider key entry selections to set lower limit values.
・Saved test conditions can be loaded using external I/O
・External I/O TEST signal OFF timing setting display
・The following four RS-232C commands are added;
______________________________________________________________
test voltage at 500 V.
2000 MΩ is displayed with test voltage at 500 V.
range maximum value.
VOLT 0 to 2 signals.
appears as "tEStSIGnAL".
:VOLTage:SIGNaL
:VOLTage:SIGNaL?
:AOUT:RANGe
:AOUT:RANGe?
i
Introduction