Setting Sampling Rate - Hioki 3154 Instruction Manual

_____________________________________________________________________

3.5 Setting Sampling Rate

Choose from two sampling rates, FAST or SLOW.
Sampling resistance and displaying value with FAST is ten
times per second and with SLOW one time per second.
When measurement value fluctuates, select SLOW for
effective reading.
During TEST status, SAMPLING lamp blinking rate alter
according to sampling rate. To confirm selected sampling
rate check the lamp blinking rate.
(1) During READY status, press SHIFT key and then
(2) Press
(3) When selected sampling rate is displayed, press STOP
______________________________________________________________
Setting Sampling Rate
TIMER key.
Display appears as shown below to display sampling
rate FAST or SLOW blinking.
FAST
SLOW
/ key to switch blinking display.
key or TIMER key to confirm. After confirming,
returns to READY status.
Setting Basic Testing Conditions
25