Rear Panel - Hioki 3154 Instruction Manual

_____________________________________________________________________
12. VOLT key
13. SHIFT lamp
14. SHIFT key
15. Handle/Stand

1.3.3 Rear Panel

1
1. Power supply
connector
2. POWER switch
3. Analog output
terminal
4. RS-232C terminal Use to connect RS-232C for remote operation
5. External I/O
terminals
6. Rear
measurement
terminals
______________________________________________________________
PRESS to set test voltage.
Turns on when SHIFT key is pressed.
Press to engage shift.
When SHIFT key is pressed, shift is engaged and
SHIFT lamp turns on. Press again to disengage
shift.
When shift is engaged, functions displayed in
blue below keys become valid.
Adjust handle to use as a stand.
2 3 4
Terminal to connect power cord. (Internal fuse
type)
Turns power ON/OFF.
Converts measured resistance value and
outputs voltage.
Use to connect 9094 OUTPUT CORD.
or optional 9442 PRINTER.
Outputs 3154 status and inputs start/stop and
test voltage switching signals.
Connect test probes. High voltage occurs
between terminals. Continuously electrically
connected to front panel measurement
terminals.
5 6
5
Outline