Quick Menu Window - Icom ID-4100A Basic Manual

■ Quick Menu window

You can open the Quick Menu window by pushing [QUICK].
In the window, the selectable items differ, depending on
the operating mode or function. The items listed below are
examples.
VFO mode Memory mode Call CH mode
Band Select Bank Select
TX Power* 1 TX Power* 1
DUP DUP
TONE* 1 * 2 TONE* 1 * 2
MHz TS
TS SKIP
DTMF TX DTMF TX
Voice TX Voice TX
RX History* 3 RX History* 3
GPS Information GPS Information
GPS Position GPS Position
Weather Weather
Information* 4 Information* 4
PRIO Watch PRIO Watch
Weather CH* 5 Weather CH* 5
Weather Alert* 5 Weather Alert*
Home CH Set Home CH Set
Clock Display Type
Voltage Clock
Band Scope Voltage
<<REC Start>> Band Scope
<<REC Start>>
DR function
TX Power Group Select
DUP Repeater Detail
TONE* 1 TX Power
TS DTMF TX
DTMF TX Voice TX
Voice TX RX History
RX History* 3 GPS Information
GPS Information GPS Position
Weather
GPS Position
Information* 4
Weather
PRIO Watch
Information* 4
PRIO Watch Weather CH*
Weather CH* 5 Weather Alert*
Weather Alert* 5 Home CH Set
Display Type DSQL
5 Clock SKIP
Voltage Clock
Band Scope Voltage
<<REC Start>> <<REC Start>>
D Quick Menu window operation
[ï]
• Sets an option.
• Goes to a next
tree level.
[DIAL]
Selects an item
or option.
Simplified description—'Select' operation
In this manual, user's 'Select' operation is simplified.
Simplified description:
1. Push [QUICK].
2. Select "TX Power," then push [ï].
Operation:
1. Push [QUICK] to open the Quick Menu window.
5
2. Rotate [DIAL] to select "TX Power," then push [ï].
5
* 1 Disappears in the AM mode.
* 2 "DSQL" is displayed in the DV mode.
* 3 Displayed in only the DV mode.
* 4 Displayed when the D-PRS TX format is set to "Weather."
* 5 Displayed in only the USA version transceivers.
BASIC OPERATION
[QUICK]
Toggles between Quick Menu
window and the standby screen.
BASIC MANUAL
3
3
20