Enabling - Silca Unocode 399 Plus Operating Manual

Operating manual - English Unocode 399 PLUS
5.10

ENABLING

From the screen, press MENU and/or F4 to enable the function.
This display shows all the protected systems enabled and allows them to be protected again, if
necessary.
E.g.:
In this case a single protected card has been
previously enabled.
As explained on the display, use the arrow keys (up
and down) to select the enabled protected system.
Press F1 to make it protected again.
The display shows a further message requiring
confirmation of removal. Press STOP to quit the
operation without making alterations, press F1 to
protect the selected card.
Press ENTER, the display will show:
Copyright Silca 2016 55