Reference Guide - Silca Unocode 399 Plus Operating Manual

Operating manual - English
This manual has been produced to serve as a guide for users of the UNOCODE 399 PLUS electronic key-cutting machine.
Read it carefully; it is essential if you wish to operate your machine safely and efficiently.
C
ONSULTATION
The contents of the manual are divided into sections relating to:
• Machine description
• Transport and installation ...................................................................................................Chapters
• Regulation and use
• Maintenance
T
ECHNICAL TERMS
Common technical terms are used in this manual.
To assist those with little experience of keys and key-cutting, below is an illustration of the terms most frequently used.
2
6
Fig. 1
1) Head
2) Rim
3) Stop
4) Stem
5) Tip
6) Back
7) Cuts
FROM SILCA KEY CATALOGUE
Card Number

REFERENCE GUIDE

...................................................................................................Chapter
...................................................................................................Chapters
...................................................................................................Chapters
1
3
4
7
5
NUMERO SCHEDA
Copyright Silca 2016
5
CARD NUMBER:
Silca number for cutting by code on Silca electronic
machines for flat keys.
Fig. 2
Unocode 399 PLUS
1
2-3
4-5-6
7-8-9
1
2
3
7
1