Silca Unocode 399 Plus Operating Manual page 40

Unocode 399 PLUS
5.6 CODEMAKER
The CODEMAKER function is used to create a
new data card with user definable cutting
parameters.
To enable the function press F4 from the initial screen.
A display will appear with the list of user created
data cards (if the machine is new the display is
blank).
The list of functions included with CODEMAKER
is represented by icons on the left.
• Create new data card (F1)
• Edit a data card (F2)
• Delete a data card (F3)
• Copy a data card (F4 then F1)
• Copy a SILCA data card (F4 then F2)
NOTE: creating of new cards is allowed for two key
types:
- SINGLE side
- DOUBLE SYMMETRICAL side
• Creating new data Card
Assign a name (description) to the new data
card. All the data on the card, except the card
number, can be edited.
Head
Once the values have been entered press F1 to
continue. The display will show:
This display screen can be used to edit:
• Type of cut (see chap. 5.4)
• Cutter (set automatically in relation to the type of cut)
• Angle (can be set for types of cut different from "V")
When editing is complete, press F1 to continue.
Press F2 to go back to the previous screen.
ATTENTION: if error messages appear, see chap.5.11.4
"CODEMAKER messages", page 60.
36
CARD MANAGEMENT
Step 1
Reference
Tip
Step 2
Copyright Silca 2016
Operating manual - English
F1
F2
F3
F4
F1
F2
F1
F2
F1
F2