Silca Unocode 399 Plus Operating Manual page 26

Unocode 399 PLUS
5) Enter the quantity of keys to be cut (max.999)
Accessory functions
(chap.5.3.2, page 25)
Press F4 to view all the functions
Fig. 24
6) Press ENTER.
Accessory functions
(chap.5.3.2, page 25)
Fig. 25
• Check that the clamp is the right one (e.g. V100 Side A)
• Install the key blank with the required reference (e.g. Stop 0).
• Check that the installed cutter is the right one (e.g. U01W - standard).
Cutters: some data cards available in the machine memory require the use of tools different from
the standard universal cutter U01W (e.g. key FO21P).
To replace the cutter follow the instructions given in chap.7.3, page 65.
22
a
b
c
F4
d
e
f
g
h
Copyright Silca 2016
Operating manual - English
number of pieces
to cut
key stop: Stop 0
clamp to use
cutter to use