Silca Unocode 399 Plus Operating Manual page 42

Unocode 399 PLUS
• Edit Data Card
This function is used to edit a card previously
created by CODEMAKER.
• Select the data card from the list and press F2.
• Follow the procedure described in "Create a new Data
Card" and edit the required parameters.
ATTENTION: if error messages
"CODEMAKER messages", page 60.
• Delete Data Card
This function is used to eliminate a data card
previously created by CODEMAKER.
• Select the data card and press F3.
ATTENTION:
card cannot be reused.
• Copy Data Card
This function is used to copy a data card
previously created by CODEMAKER and edit its
parameters.
• Select the data card.
• Press F4 then F1.
• Press ENTER.
• Enter a description of the data card.
• Follow the procedure described in "Create a new data
card" and edit the required parameters.
38
appear, see chap.5.11.4
when a card is deleted the number of that
Copyright Silca 2016
Operating manual - English
F2
F3
F1