Authorization Table; Snmp Management; Upload Configuration To Ftp Server; Reset Access Point To Factory Defaults - Proxim RANGELAN2 7510 User Manual

Authorization Table

The Authorization Table is described in Chapter 11.

SNMP Management

SNMP Management is described in Chapter 9.

Upload Configuration to FTP Server

This menu is only visible on the 752x Access Point. This feature allows you to upload
the current configuration of each Access Point on the network to a file on an FTP server.
A member of the Proxim Technical Support Department may ask you to create this file
for troubleshooting purposes.
When the Upload AP Configuration Data using FTP option is selected, you will be
prompted to enter the name of the directory to which the file will be uploaded, the IP
Address of the FTP server, the FTP User Name, and FTP Password. This menu also
allows you to enable or disable an Access Point's ability to respond to an upload request
from another Access Point. By default, the Access Point is configured to respond to
upload requests.

Reset Access Point to Factory Defaults

Use this option to reset all the parameters to default values. This option is only visible
when configuring the Access Point via a terminal, not via telnet.

Dump Configuration to Screen

This parameter displays the current configuration of the RangeLAN2 Access Point to the
screen. Using a screen snapshot program you can save these settings. A member of the
Proxim Technical Support Department may ask you to print out this snapshot for trouble-
shooting purposes.
38