Connecting The Mains Cable; General; Stipulated Mains Cables - Fronius TPS 320i Operating Instructions Manual

Connecting the mains cable

General

If no mains cable is connected, a mains cable that is suitable for the connection voltage
must be fitted before commissioning.
A universal strain-relief device for cable diameters from 12 - 30 mm (0.47 - 1.18 in.) is fitted
to the power source.
Strain-relief devices for other cable cross-sections must be designed accordingly.
Stipulated mains
Power source
cables
TPS 320i /nc
TPS 320i /MV/nc
TPS 320i /600V/nc **
TPS 400i /nc
TPS 400i /MV/nc
TPS 400i /600V/nc **
TPS 500i /nc
TPS 500i /MV/nc
TPS 500i /600V/nc **
TPS 600i /nc
TPS 600i /600V/nc **
*
**
AWG = American wire gauge
Mains voltage
3 x 400 V
3 x 460 V
3 x 230 V
3 x 460 V
3 x 575 V
3 x 400 V
3 x 460 V
3 x 230 V
3 x 460 V
3 x 575 V
3 x 400 V
3 x 460 V
3 x 230 V
3 x 460 V
3 x 575 V
3 x 400 V
3 x 460 V
3 x 575 V
Cable type for USA / Canada: Extra-hard usage
Power source without CE mark; not available in Europe
Cable cross-section
USA / Canada * Europe
AWG 12 4 G 2.5
AWG 14 4 G 2.5
AWG 10 4 G 4
AWG 14 4 G 2.5
AWG 14 -
AWG 10 4 G 4
AWG 12 4 G 4
AWG 6 4 G 6
AWG 10 4 G 4
AWG 12 -
AWG 8 4 G 4
AWG 10 4 G 4
AWG 6 4 G 10
AWG 10 4 G 4
AWG 10 -
AWG 6 4 G 10
AWG 6 4 G 10
AWG 6 -
53