Connecting The Mains Cable; General; Stipulated Mains Cables And Strain-Relief Devices; Safety - Fronius TransSteel 4000 Pulse Operating Instructions Manual

Connecting the Mains Cable

General

If no mains cable is connected, a mains cable that is suitable for the connection voltage
must be fitted before commissioning.
A strain-relief device for the following cable cross-sections is fitted to the power source:
*)
Strain-relief devices for other cable cross-sections must be designed accordingly.
Stipulated mains
cables and strain-
relief devices
*)
The item numbers of the different cables can be found in the Spare Parts List for the de-
vices.
AWG ... American Wire Gauge

Safety

Danger from work that is not carried out properly.
This can result in severe personal injury and damage to property.
► The work described below may only be performed by trained specialist personnel.
► Follow national standards and guidelines.
44
Power source
TransSteel 4000 Pulse
TransSteel 5000 Pulse
TransSteel 4000 MV
Pulse
TransSteel 5000 MV
Pulse
Canada / US cable type: Extra-hard usage
Power source
TransSteel 4000
Pulse
TransSteel 5000
Pulse
TransSteel 4000 MV
Pulse
TransSteel 5000 MV
Pulse
Canada / US cable type: Extra-hard usage
WARNING!
Cable cross-section
Fitted strain-relief device for
Canada/US
AWG 12 *)
AWG 10 *)
AWG 10 *)
AWG 6 *)
Grid voltage
3 x 380 / 400 V
3 x 460 V
3 x 380 / 400 V
3 x 460 V
3 x 208 / 230 / 400 /460 V
3 x 208 / 230 / 400 / 460 V
Europe
4G2.5
4G4
4G4
4G10
Cable cross-sec-
tion Europe
Canada / US
AWG 12 *) 4G2.5
AWG 12 *) 4G2.5
AWG 8 *) 4G4
AWG 10 *) 4G4
AWG 10 *) 4G4
AWG 6 *) 4G10