Function Packages; Welding Packages; Special Characteristics; Options - Fronius TPS 320i Operating Instructions Manual

Function Packages

Function Packag- In the Function Packages entry, the function packages, special characteristics, options,
es etc., present on the power source are displayed.
New function packages can also be uploaded.
Welding Packag- Under Welding Packages, the welding packages present on the power source are dis-
es played with their respective item numbers, e.g.:
-
-
-
-
Possible upgrades:
-
-
Special charac- Under special characteristics, the available special characteristics present on the power
teristics source are displayed with their respective item numbers, e.g.:
-
-

Options

The options available on the power source are displayed under "Options" with their respec-
tive item numbers and possible upgrades, e.g.:
Options
-
-
Possible upgrades
-
-
-
Installing a func-
1
tion package
2
3
4
5
WP Standard, (MIG/MAG standard synergic welding)
WP Pulse (MIG/MAG pulse synergic welding)
WP LSC (Low Spatter Control, low-spatter dip transfer arc process)
WP PMC (Pulse Multi Control, enhanced pulsed arc welding process)
WP CMT
etc.
PMC - AlMg4,5Mn(Zr) - I3 Ar...
etc.
OPT/i GUN Trigger
etc.
OPT/i Jobs
OPT/i Interface Designer ...
etc.
Organise and save a function package
Click on "Search function package file"
Select the desired function package file (*.xml)
Click on "Open"
The selected function package file is displayed on the power source SmartManager
under "Install function package".
Click on "Install function package"
Once the function package has been successfully installed, a confirmation to this ef-
fect is displayed.
187