Logging On - Unlocking Function, Forgotten Password; Changing Password / Logging Off - Fronius TPS 320i Operating Instructions Manual

Logging on - un- There are two auxiliary functions when logging on to SmartManager:
locking function, -
forgotten pass- -
word
Start unlocking function?
An unintentionally locked power source can be unlocked with this function and all its func-
tions made available.
1
2
A TXT file with the following name will be saved to the computer's "Downloads" folder:
unlock_SN[serial number]_YYYY_MM_DD_hhmmss.txt
3
Fronius will respond to each e-mail with a one-time unlocking file named as follows:
response_SN[serial number]_YYYY_MM_DD_hhmmss.txt
4
5
6
7
This will work just once to unlock the power source.
Forgotten password?
After clicking "Forgotten password?" a notice will be displayed explaining that the pass-
word can be reset on the power source (see "Resetting the website password", page 141).
Changing pass-
word / logging off
Changing the password for the SmartManager:
1
2
3
4
172
Start unlocking function?
Forgotten password?
Click "Start unlocking function"?
Create verification file:
click on "Save"
Send this verification file to Fronius Technical Support by e-mail:
welding.techsupport@fronius.com
Save the unlocking file to your computer
Click on "Search unlocking file"
Apply unlocking file
Click on "Install unlocking file"
By clicking this symbol
- the user password can be changed
- you can log out of SmartManager
NOTE!
User name = admin (predefined, cannot be edited!)
The password can only be reset on the power source.
Enter the old password
Enter the new password
Repeat the new password
Click on "Save"