Connecting The Mains Cable; General; Safety - Fronius Artis 170 Operating Instructions Manual

Connecting the Mains Cable

General

If a welding system is delivered without a mains cable installed, a mains cable
corresponding to the welding system's connection voltage must be connected
before commissioning.
The mains cable is included in the scope of supply for the welding system.

Safety

Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Connecting the
mains cable
IMPORTANT! If the welding system is equipped with a mains cable but no mains
plug, connection to the public grid must only be carried out in accordance with
national guidelines and only by trained and qualified personnel.
38
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this equip-
ment and all system components.
To connect the mains cable:
1
- Plug in the mains cable
- Turn the mains cable 45° to
the right until it audibly locks
into place