Process parame-
ters for wire stick
contact tip
1
2
An overview of the process parameters for components and monitoring is displayed:
3
The overview "Wire stick contact tip - setup menu" is displayed.
4
5
6
1
Select "Process parameters"
Select "Components & Monitoring"
Select "Wire stick contact tip"
Turn the adjusting dial and select the desired parameter
Press the adjusting dial (blue background)
Turn the adjusting dial and change the value of the parameter (blue background)
Wire stick on contact tip = ignore:
The wire stick check on the contact tip is deactivated.
Wire stick on contact tip = error (activated):
2
3
121