Process Parameter For Wire End Monitoring - Fronius TPS 320i Operating Instructions Manual

3
The overview "Wire stick workpiece - setup menu" is displayed.
4
5
6
7
Process parame-
ter for wire end
monitoring
1
2
An overview of the process parameters for components and monitoring is displayed:
Select "Wire stick work piece"
Turn the adjusting dial and select the desired parameter
Press the adjusting dial (blue background)
Turn the adjusting dial and change the value of the parameter (blue background)
Wire stick on workpiece = ignore:
Wire stick monitoring on the workpiece is deactivated.
Wire stick on workpiece = error (activated):
The welding process will be interrupted if the wire sticks on the workpiece.
Factory settings = ignore
Select "OK" to confirm the settings
1
Select "Process parameters"
Select "Components & Monitoring"
2
123