Connecting The Mains Cable; General; Stipulated Mains Cables And Strain-Relief Devices - Fronius TransSteel 4000 Pulse Operating Instructions Manual

Connecting the Mains Cable

General

If no mains cable is connected, a mains cable that is suitable for the connection
voltage must be fitted before commissioning.
A strain-relief device for the following cable cross-sections is fitted to the power
source:
*)
Strain-relief devices for other cable cross-sections must be designed accord-
ingly.
Stipulated mains
Power source
cables and
strain-relief
devices
TransSteel 4000
Pulse
TransSteel 5000
Pulse
TransSteel 4000 MV
Pulse
TransSteel 5000 MV
Pulse
*)
The item numbers of the different cables can be found in the Spare Parts List for
the devices.
AWG ... American Wire Gauge
46
Power source
TransSteel 4000 Pulse
TransSteel 5000 Pulse
TransSteel 4000 MV
Pulse
TransSteel 5000 MV
Pulse
Canada / US cable type: Extra-hard usage
Canada / US cable type: Extra-hard usage
Cable cross-section
Fitted strain-relief device
for
Canada/US
AWG 12 *)
AWG 10 *)
AWG 10 *)
AWG 6 *)
Grid voltage
3 x 380 / 400 V
3 x 460 V
3 x 380 / 400 V
3 x 460 V
3 x 208 / 230 / 400 /460
V
3 x 208 / 230 / 400 /
460 V
Europe
4G2.5
4G4
4G4
4G10
Cable cross-sec-
tion
Europe
Canada / US
AWG 12 *) 4G2.5
AWG 12 *) 4G2.5
AWG 8 *) 4G4
AWG 10 *) 4G4
AWG 10 *) 4G4
AWG 6 *) 4G10