Mode Setup: Activating The Special 4-Step Mode "Guntrigger", Special Display For Jobmaster And Torch Trigger Job Selection - Fronius TPS 320i Operating Instructions Manual

Mode Setup: Acti- In the default settings, the following special functions can be set under "Mode Setup":
vating the special -
4-step mode -
"Guntrigger", -
special display
for JobMaster
*
and torch trigger
job selection
1
2
3
The "Mode Setup" overview appears.
4
5
6
7
The default settings are displayed.
Special 4-step = Guntrigger
With a JobMaster welding torch and with special 4-step mode selected, this function allows
you to change jobs via the torch trigger during welding. Job changing takes place within
defined job groups.
A job group is defined by the next non-programmed job.
142
Special 4-step mode "Guntrigger" for a JobMaster welding torch *
JobMaster special display for a JobMaster welding torch *
Torch trigger job selection for a welding torch
Only if the OPT/i GUN Trigger option is available on the power source.
1
Select "Defaults"
Select "System"
Select "Mode Setup"
Turn the adjusting dial and select the desired special function (white background)
Press the adjusting dial (blue background)
Turn the adjusting dial to activate/deactivate the special function
Select "OK"
2
3