Documentation - Fronius TPS 320i Operating Instructions Manual

Documentation

Documentation The welding data for the last 100 welding operations is displayed in the Documentation en-
try.
The welding data display can be filtered by a certain period using the "Time filter" button.
To do so, the date (yyyy mm dd) and time (hh mm) are entered in the format from – to in
each case.
An empty filter loads the latest welding operations again.
The following data is displayed:
(1)
(2)
(3)
(4)
-
-
-
-
If the OPT/i documentation option is available on the power source, individual welding sec-
tions can also be displayed.
176
(1) (2)
Welding operation number
Start time (date and time)
Welding duration in s
Welding current in A
Further values can be displayed by clicking on the "Insert column" button:
-I max / I min: maximum/minimum welding current in A
Max power / Min power: maximum/minimum arc power in W
Start time (power source time); date and time
U max / U min: maximum/minimum welding voltage in V
Vd max / Vd min: maximum/minimum wire speed in m/min
(3) (4) (5)
(5)
(6)
(7)
(8)
This documentation can be exported in the desired format
using the "PDF" and "CSV" buttons.
In order to create CSV exports, the OPT/i documentation
option must be available on the power source.
(6) (7)
Welding voltage in V
Wire speed in m/min
IP – arc power in W
IE – arc energy in kJ
(8)