Fpga Mezzanine Card (Fmc) Interface - Intel Cyclone 10 GX FPGA User Manual

pin on HD3SS3220 indicates the port is linked as a power source (DFP), or
USB_ID
dual-role (DRP) acting as source (DFP).
TPS25910 and USB3320.
Backward support for USB2.0 is implemented with Microchip's USB3320 USB PHY. It
interfaces with the FPGA through ULPI interface. The reference clock mode for ULPI is
FPGA clock output to USB3320.

4.9.5 FPGA Mezzanine Card (FMC) Interface

A FMC Connector (J7) is provided on the development kit for expansion. The FMC
interface is compatible with the following daughter cards:
• 12G SDI: Semtech RDK-12GSRD-ALTRA00 Evaluation Board
• 8G DisplayPort: Bitec FMC DisplaPort Daughter Card
• 6G HDMI 2.0: Bitec FMC HDMI Daughter Card
Table 17. FMC Signals
Intel Cyclone 10 GX FPGA Development Kit
Signal V57.1 Name
FMC_DP_C2M_ DP0_C2M_P
P0
FMC_DP_C2M_ DP0_C2M_N
N0
FMC_DP_C2M_ DP1_C2M_P
P1
FMC_DP_C2M_ DP1_C2M_N
N1
FMC_DP_C2M_ DP2_C2M_P
P2
FMC_DP_C2M_ DP2_C2M_N
N2
FMC_DP_C2M_ DP3_C2M_P
P3
FMC_DP_C2M_ DP3_C2M_N
N3
FMC_DP_C2M_ DP4_C2M_P
P4
FMC_DP_C2M_ DP4_C2M_N
N4
X DP5_C2M_P
X DP5_C2M_N
X DP6_C2M_P
X DP6_C2M_N
X DP7_C2M_P
® ®
Intel Cyclone 10 GX FPGA Development Kit User Guide
32
USB_ID
Signal Name Pin Number
DP0_C2M_P C2
DP0_C2M_N C3
DP1_C2M_P A22
DP1_C2M_N A23
DP2_C2M_P A26
DP2_C2M_N A27
DP3_C2M_P A30
DP3_C2M_N A31
DP4_C2M_P A34
DP4_C2M_N A35
DP5_C2M_P A38
DP5_C2M_N A39
DP6_C2M_P B36
DP6_C2M_N B37
DP7_C2M_P B32
4 Development Board Components
UG-20105 | 2017.12.18
is connected to the FPGA as well as
SDI DisplayPort
SDI FMC DisplayPort
Signal Name FMC Signal
Name
x FMC_TX_P0
x FMC_TX_N0
x FMC_TX_P1
x FMC_TX_N1
FMC_GS12181 FMC_TX_P2
_IN+
FMC_GS12181 FMC_TX_N2
_IN-
x FMC_TX_P3
X FMC_TX_N3
x x
x x
x x
x x
x x
x x
x x
HDMI
HDMI FMC
Signal Name
GXB_TXp0
GXB_TXn0
GXB_TXp1
GXB_TXn1
GXB_TXp2
GXB_TXn2
GXB_TXp3
GXB_TXn3
x
x
x
x
x
x
x
continued...