Intel Cyclone 10 GX FPGA User Manual page 56

Figure 19. Power Monitor Interface
The controls on the Power Monitor are described below.
Table 20. Power Monitor GUI
Options
Graph
Table
Configuration
Reset
Temperature
® ®
Intel Cyclone 10 GX FPGA Development Kit User Guide
56
Displays the mA power consumption of your board over time. The green line indicates
the current value. The red line indicates the maximum value read since the last reset.
The yellow line indicates the minimum value read since the last reset.
It also displays root mean square (RMS) current, maximum and minimum numerical
power readings in mA.
Displays real time values of power rails. It refreshes about every 10 seconds.
When you click some rail, the power rail will show on the Graph Chart.
Speed Adjustment: Specifies how often to refresh the graph.
Date Record: Record real time voltage, current and power values, and save to a log
file.
Clears the graph, resets the minimum and maximum values and restarts the Power
Monitor.
Displays the temperature of the FPGA and the development kit.
5 Board Test System
UG-20105 | 2017.12.18
Description