Recommended Operating Conditions - Intel Cyclone 10 GX FPGA User Manual

LEDs
• 4 User LEDs
• 1 Power LED
• 1 Config Done LED
• PFL Load/Error LED
• PFL Program Number LED
• Ethernet LEDs
• SFP+ LEDs
Heatsink and Fan
Heatsink with fan
Power
• 12 V power input from ATX 2 x 4 power connector
• 12 V external power adaptor input
• 12 V power input from PCIe system
• On/Off Slide Power Switch
• On-board power measurement and management
• Adjustable FMC+ power regulator
• Power Failure Monitor
• Power-off discharge circuit
Dimensions
Full height PCIe add-in card 4.376" (Height) x 7" (Length)
Operating Environment
Ambient Temperature: 0° C to 45° C

1.2 Recommended Operating Conditions

• Recommended ambient operating temperature range: 0° C to 45° C
• Maximum ICC load current: 6 Amp
• Maximum ICC load transient percentage: 30%
• Maximum board power consumption: 75 Watts
1.3 Handling the Board
When handling the board, it is important to observe static discharge precautions.
Note: Without proper anti-static handling, the board could be damaged. Use anti-static
handling precautions when handling the board.
Note: This development kit should not be operated in a Vibration environment.
® ®
Intel Cyclone 10 GX FPGA Development Kit User Guide
6
1 Overview
UG-20105 | 2017.12.18