The Xcvr Tab - Intel Cyclone 10 GX FPGA User Manual

5 Board Test System
UG-20105 | 2017.12.18
The following sections describe the controls on the Flash tab
Read
Reads the flash memory on your board. To see the flash memory contents, type a
starting address in the text box and click Read. Values starting at the specified
address in the table.
Write
Writes the flash memory on your board. To update the flash memory contents, change
values in the table then press the Enter key and click Write. The application writes the
new values to flash memory and then reads the values back to guarantee that the
graphical display accurately reflects the memory contents.
Random
Starts a random data pattern test to flash memory, limited to the 512K test system
scratch page.
Increase
Starts an incrementing data pattern test to flash memory, limited to the 512K test
system scratch page.
Erase
Erases flash memory of the current sector.
Flash Memory Map
Displays the flash memory map for the development board.

5.3.5 The XCVR Tab

This tab allows you to perform loopback tests on the PCIe and SFP+ ports.
® ®
Intel Cyclone 10 GX FPGA Development Kit User Guide
47