Delete Equipment - Symmetricom TimeSource 3600 User Manual

Chapter 4 TL1 Reference
Commands

Delete Equipment

This command deletes the specified equipment from the database, removes the
input from the ensembling algorithm, and stops the monitoring for that input. Alarms
are not reported for deleted equipment. The command format is:
DLT-EQPT:[<tid>]:<aid>:<ctag>::<spec_block>
Aid
SPAN-a a = A
a = B
OPT-a a = 1
a = 2
Command Example:
DLT-EQPT::SPAN-A:<ctag>;
Response Format:
M
;
130 TimeSource 3600 User's Guide
Value Item Addressed
E1 span A input
E1 span B input
ESCIU port 1
(990-72060-04 systems only)
ESCIU port 2
(990-72060-04 systems only)
<sid> <date> <time>
<ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
097-72060-01 Revision J – June, 2007