Retrieve Communication - Symmetricom TimeSource 3600 User Manual

Chapter 4 TL1 Reference
Commands

Retrieve Communication

This command displays communication port parameter settings. The command
format is:
RTRV-COM:[<tid>]:<aid>:<ctag>;
Aid
COM-a a = 1
a = 2
a = 3
a = 5001
a = 5002
a = 5003
a = 5004
a = 5551
ALL —
Response Format:
M
;
The parameters which may be displayed in the <spec_block> are listed below.
Parameter
MONMSG=a
KEEPALIVE=a
154 TimeSource 3600 User's Guide
Value
Serial communication port 1
Serial communication port 2
Serial communication port 3
Ethernet user interface port 5001
Ethernet user interface port 5002
Ethernet user interface port 5003
Ethernet user interface port 5004
Ethernet element manager interface port 5551
All communication ports
<sid> <date> <time>
<ctag> COMPLD
"<aid>:::<spec_block>"...
/*LINK:<link>,CMD:<command>*/
Value
a = ALW View messages from all ports
a = INH View messages from this port only
a = 1 to Inactive minutes until the unit sends a COMPLD
255 message to keep the connection from being closed
a = 0 No COMPLD message is output
Item Addressed
Description
097-72060-01 Revision J – June, 2007