Symmetricom TimeSource 3600 User Manual page 134

Chapter 4 TL1 Reference
Commands
Aid Parameter
COM-a BAUD=b
(See Note: 3)
(cont'd)
PARITY=b
(See Note: 3)
STOP=b
(See Note: 3)
Note:
1 Flow control is not implemented on communication port 3 (Craft port).
2 XON/XOFF flow control is simulated for Ethernet ports.
3 Baud rate, parity, and stop bits can only be configured on serial communication ports (1, 2, and 3).
Command Example:
ED-COM::COM-1:<ctag>:::BAUD=9600,MONMSG=ALW,
COMPRI=ALW1,AUTOLOGOFF=30,HWCONTROL=ALW,
Response Format:
M
;
134 TimeSource 3600 User's Guide
Value
b = 115
b = 57.6
b = 38.4
b = 19.2
b = 9600
b = 4800
b = 2400
b = 1200
b = EVEN
b = ODD
b = NONE
b = 1
b = 2
KEEPALIVE=30,ENDOFTEXT=0,ECHO=ALW,
SWCONTROL=ALW,PARITY=NONE,STOP=1;
<sid> <date> <time>
<ctag> COMPLD
/*LINK:<link>,CMD:<command>*/
Description
Serial port baud rate is 115 kbaud
Serial port baud rate is 57.6 kbaud
Serial port baud rate is 38.4 kbaud
Serial port baud rate is 19.2 kbaud
Serial port baud rate is 9600 baud
Serial port baud rate is 4800 baud
Serial port baud rate is 2400 baud
Serial port baud rate is 1200 baud
Even parity is enabled on serial port
Odd parity is enabled on serial port
No parity is enabled on serial port
1 stop bit on serial port
2 stop bits on serial port
097-72060-01 Revision J – June, 2007